Loading...

Standard Drink Calculator: How Much Alcohol Is in Your Drink?

Calculate how much pure alcohol is contained in beer, wine, spirits, hard seltzers and cocktails with our free standard drink calculator. Enter your beverage volume, alcohol by volume (ABV) and number of servings to calculate US standard drinks, grams of pure alcohol and equivalent alcohol units. Compare different beverage sizes and strengths to better understand how much alcohol a drink actually contains.

Calculate Standard Drinks, Alcohol Units and Pure Alcohol Content

Select a beverage type or enter a custom serving size and alcohol percentage. Our alcohol content calculator converts beverage volume into grams of pure alcohol, US standard drinks and UK alcohol units. Add multiple beverages or individual cocktail ingredients to calculate their combined alcohol content. Results are educational estimates and do not determine intoxication or drinking safety.

1Add your drinks

Tap a drink to add it, then adjust the size, alcohol content (ABV) and number. Check the label for the exact ABV.

2Over what time did you drink these?

Compare with guidelines for

Your result

Standard drinks in one day
0

Standard drinks by drink

How this compares

NIAAA definitions. These describe drinking patterns that raise health risks; they are not safe limits, and drinking less is better for health.

Concerned about your drinking?
Free, confidential help 24/7: SAMHSA National Helpline 1-800-662-HELP (4357).
Find rehabs near me

One U.S. standard drink contains 14 grams (0.6 fl oz) of pure alcohol, as defined by NIAAA. Standard drinks = fluid ounces × ABV ÷ 0.6. Binge, heavy and high-intensity drinking definitions are from NIAAA. Preset ABVs are typical values; craft beer and hard seltzer ABVs vary widely, so check the label. A mixed drink can contain more than one standard drink. Estimates only, not medical advice. Nothing you enter is saved or sent anywhere.

What Is a Standard Drink Calculator?

A standard drink calculator is an online tool that estimates the amount of pure alcohol contained in an alcoholic beverage. It converts beverage volume and alcohol concentration into a standardized measurement, making it easier to compare beer, wine, distilled spirits and mixed drinks.

The RehabsNearMe.ai standard drink calculator uses the United States definition of a standard drink. Users can enter beverage volumes in milliliters, US fluid ounces or liters and provide alcohol strength as a percentage of alcohol by volume or US proof.

The calculator also displays grams of pure alcohol, UK alcohol units and the estimated calories contributed by ethanol. Multiple beverages or individual cocktail ingredients can be combined into a single alcohol-content estimate.

Unlike counting glasses, cans or bottles, calculating standard drink equivalents considers how much alcohol each container actually holds. A single beverage may contain less than one standard drink or several standard drinks, depending on its volume and strength.

How to Use Our Free Standard Drink Calculator

To calculate standard drinks accurately, check the beverage container for its alcohol percentage and determine the amount of liquid you want to measure.

  1. Select a beverage: Choose beer, wine, distilled spirits, hard cider, hard seltzer or a custom beverage.
  2. Enter the volume: Provide the amount of liquid in each serving or container being calculated.
  3. Choose the measurement: Select US fluid ounces, milliliters or liters.
  4. Enter the alcohol strength: Use the ABV percentage printed on the product label or its US proof value.
  5. Enter the number of servings: Specify how many equivalent servings are included in your calculation.
  6. Add additional beverages: Include other drinks or individual alcoholic cocktail ingredients.
  7. Review your results: View total standard drinks, grams of ethanol, pure alcohol volume and UK alcohol units.

The calculator updates automatically when you change an input. You can adjust beverage quantities, remove individual records, copy the results or reset the calculator.

Example beverage strengths are editable and should not be assumed to represent every product within a particular beverage category.

What Is a Standard Drink in the United States?

A US standard drink represents approximately 14 grams of pure ethanol, regardless of whether that alcohol comes from beer, wine or distilled spirits.

The National Institute on Alcohol Abuse and Alcoholism uses this measurement to help individuals and healthcare professionals describe alcohol consumption consistently.

It is important to understand that a standard drink is a measurement of alcohol content rather than a recommended amount to consume.

The actual number of standard drinks in a beverage depends on its volume and alcohol concentration. A large glass of wine or a strong craft beer may contain substantially more alcohol than a conventional reference serving.

US Standard Drink Chart

The following chart illustrates several common beverage sizes that contain approximately equivalent quantities of pure alcohol.

Alcoholic Beverage Serving Size Alcohol Content US Standard Drinks
Regular Beer 12 fl oz 5% ABV Approximately 1
Malt Liquor 8.5 fl oz 7% ABV Approximately 1
Table Wine 5 fl oz 12% ABV Approximately 1
Distilled Spirits 1.5 fl oz 40% ABV Approximately 1

These reference measurements are consistent with the alcohol-content guidance published by the Centers for Disease Control and Prevention.

Actual products may contain different alcohol concentrations. Use the product-specific ABV value whenever possible.

How to Calculate Standard Drinks

Our calculator uses the relationship between liquid volume, alcohol concentration and the approximate density of ethanol. The same calculation applies to beer, wine, spirits and other alcoholic beverages.

Step 1: Convert Beverage Volume to Milliliters

Convert the amount of liquid into milliliters before calculating alcohol content.

  • 1 US fluid ounce equals approximately 29.5735 mL.
  • 1 liter equals 1,000 mL.

Step 2: Calculate Pure Alcohol Volume

Multiply the beverage volume by its ABV percentage divided by 100.

Pure Alcohol Volume (mL) = Beverage Volume (mL) × ABV ÷ 100.

Step 3: Calculate the Weight of Pure Alcohol

Multiply the estimated pure alcohol volume by the approximate density of ethanol, which is 0.789 grams per milliliter.

Grams of Alcohol = Pure Alcohol Volume (mL) × 0.789.

Step 4: Convert Alcohol Grams Into Standard Drinks

Divide the estimated alcohol weight by 14 grams.

US Standard Drinks = Grams of Pure Alcohol ÷ 14.

Complete Standard Drink Formula

US Standard Drinks = Volume (mL) × ABV (%) × 0.789 ÷ 1,400.

For multiple identical servings, multiply the result by the number of servings. For different beverages, calculate each beverage separately and add the resulting alcohol amounts.

The calculator retains the underlying calculation precision and rounds displayed results to two decimal places.

Example: Calculating Standard Drinks in a 16-Ounce Beer

Consider a 16-fluid-ounce beer containing 7% alcohol by volume. Although this beverage may be served in a single can or glass, its alcohol content is greater than that of a conventional reference beer.

Calculation Component Estimated Result
Beverage Volume 473.18 mL
Alcohol by Volume 7%
Pure Alcohol Volume 33.12 mL
Alcohol Weight 26.13 g
US Standard Drinks 1.87
UK Alcohol Units 3.31

This example demonstrates why the number of containers consumed does not necessarily correspond to the number of standard drinks.

What Is Alcohol by Volume (ABV)?

Alcohol by volume, commonly abbreviated as ABV, describes the proportion of a liquid's volume that consists of pure ethanol.

A beverage labeled 5% ABV contains approximately five milliliters of pure alcohol for every 100 milliliters of beverage.

ABV is commonly printed on the labels of alcoholic beverages. It allows consumers to compare alcohol concentration even when beverages differ in serving size or product category.

However, alcohol concentration alone does not establish the total amount of alcohol in a serving. A smaller serving of a stronger beverage may contain an amount of alcohol similar to that in a larger serving of a weaker beverage.

Our alcohol content calculator combines both volume and concentration rather than relying on ABV alone.

Alcohol Proof vs. ABV: How to Convert Between Them

Distilled spirits in the United States may display alcohol concentration using both an ABV percentage and a proof value.

US proof is calculated by multiplying the alcohol by volume percentage by two.

US Proof = ABV (%) × 2.

ABV (%) = US Proof ÷ 2.

US Proof Alcohol by Volume
40 Proof 20% ABV
60 Proof 30% ABV
80 Proof 40% ABV
90 Proof 45% ABV
100 Proof 50% ABV
120 Proof 60% ABV

Our calculator allows you to enter either measurement and automatically converts between them when you change the strength measurement setting.

The conversion applies to the modern United States proof system. Historical proof systems used in other countries may differ.

How Many Standard Drinks Are in a Beer?

The number of standard drinks in a beer depends on its container size and alcohol concentration. A conventional 12-fluid-ounce beer at 5% ABV contains approximately one US standard drink.

However, craft beers, large cans and stronger beer varieties may contain substantially more alcohol.

Beer Size ABV US Standard Drinks
12 fl oz 4% 0.80
12 fl oz 5% 1.00
12 fl oz 7% 1.40
12 fl oz 9% 1.80
16 fl oz 5% 1.33
16 fl oz 7% 1.87
24 fl oz 5% 2.00
24 fl oz 8% 3.20

These calculations demonstrate the effect of both beverage size and alcohol concentration. They are not recommendations about acceptable alcohol consumption.

How Many Standard Drinks Are in a Glass of Wine?

A five-fluid-ounce serving of wine containing 12% ABV represents approximately one US standard drink.

Wine served at home or in restaurants may contain different volumes, and individual wines can vary in alcohol strength.

Our wine alcohol calculator settings allow you to enter the actual amount poured and the ABV printed on the wine bottle.

Wine Serving ABV US Standard Drinks
4 fl oz 12% 0.80
5 fl oz 12% 1.00
6 fl oz 12% 1.20
8 fl oz 12% 1.60
5 fl oz 14% 1.17
8 fl oz 14% 1.87

A glass is a physical container rather than a standardized measure of alcohol. The actual poured volume is therefore necessary for an accurate calculation.

How Many Standard Drinks Are in a Bottle of Wine?

A common wine bottle contains 750 milliliters of liquid. The number of standard drinks in the entire bottle depends on its ABV.

For example, a 750-milliliter bottle containing 12% alcohol has approximately 90 milliliters of pure ethanol. This corresponds to roughly 71 grams of alcohol, or 5.07 US standard drinks.

Bottle Size ABV Alcohol (g) US Standard Drinks
750 mL 10% 59.18 4.23
750 mL 12% 71.01 5.07
750 mL 13% 76.93 5.49
750 mL 14% 82.85 5.92
750 mL 15% 88.76 6.34

These figures represent the alcohol contained in the complete bottle, not an appropriate amount for an individual to consume.

If you only want to calculate the alcohol in a portion of the bottle, enter the actual volume of that portion rather than the total bottle size.

How Many Standard Drinks Are in a Shot of Liquor?

A reference serving of distilled spirits in the United States is 1.5 fluid ounces at 40% ABV. This amount contains approximately one US standard drink.

However, shot volumes and spirit strengths can differ between products and locations.

Serving Size ABV US Standard Drinks
1 fl oz 40% 0.67
1.5 fl oz 40% 1.00
2 fl oz 40% 1.33
1.5 fl oz 50% 1.25
2 fl oz 50% 1.67

The mathematical relationship applies to vodka, whiskey, tequila, rum, gin and other spirits when their volume and actual ABV are known.

How to Calculate Standard Drinks in a Cocktail

Mixed drinks can contain several alcoholic ingredients, which makes counting standard drinks based on the number of glasses unreliable.

Our calculator allows you to enter each alcoholic ingredient as a separate record. Enter the volume and ABV of each ingredient and then review the combined standard drink total.

When calculating a cocktail, nonalcoholic mixers do not increase the total ethanol content. They may change the final alcohol concentration and increase the drink's total volume or calorie content.

If a complete mixed drink has a reliable, known ABV, you can enter its total liquid volume and final ABV instead of listing the ingredients individually.

Do not enter both the finished cocktail and all of its individual alcoholic ingredients, because doing so would count the same alcohol twice.

For additional educational resources, visit the NIAAA cocktail content calculator.

Standard Drinks vs. Alcohol Units

People searching for an alcohol units calculator may encounter different measurement systems depending on the country in which a resource was developed.

The United States uses a standard drink containing approximately 14 grams of pure alcohol. The United Kingdom defines an alcohol unit using a pure ethanol volume of 10 milliliters.

Measurement System Definition
US Standard Drink 14 grams of pure alcohol
UK Alcohol Unit 10 milliliters of pure alcohol

Using the ethanol density applied in our calculator, one UK alcohol unit represents approximately 7.89 grams of ethanol. This is commonly rounded to eight grams in public health guidance.

Consequently, one US standard drink corresponds to approximately 1.77 UK alcohol units under the calculator's formula.

Our calculator displays both measurements but uses US standard drinks as its primary result because RehabsNearMe.ai focuses on addiction treatment resources in the United States.

How to Calculate UK Alcohol Units

The UK alcohol unit calculation is based on pure alcohol volume rather than the US standard drink weight definition.

UK Alcohol Units = Beverage Volume (mL) × ABV (%) ÷ 1,000.

For example, a 500-milliliter beverage containing 5% ABV has 25 milliliters of pure alcohol and therefore contains 2.5 UK alcohol units.

For more information about this measurement system, refer to the NHS alcohol units guidance.

Different national measurement systems should not be treated as interchangeable without converting their underlying alcohol quantities.

How Many Calories Are in One Standard Drink?

Ethanol provides approximately seven kilocalories per gram. Because a US standard drink contains approximately 14 grams of ethanol, it contributes about 98 calories from alcohol alone.

However, total beverage calories may be higher because beer, wine, liqueurs and mixed drinks can also contain carbohydrates, sugars or other calorie-containing ingredients.

The alcohol-only calorie result shown in this calculator therefore represents the energy contributed by estimated ethanol content rather than the complete nutritional content of the beverage.

To estimate total beverage calories, including additional ingredients and product nutrition information, use our alcohol calorie calculator.

Why Counting Alcohol Standard Drinks Matters

Counting physical drinks can underestimate alcohol consumption when beverages are larger or stronger than conventional reference servings.

For example, a person recording two large, high-ABV beers as two drinks may overlook the fact that those beverages contain substantially more than two standard drink equivalents.

Standardized alcohol measurements may help people describe their consumption more consistently when discussing drinking habits with healthcare professionals.

However, a standard drink total is only one component of alcohol-related health assessment. Drinking frequency, speed of consumption, medical history, medications and other individual circumstances can also influence health risks.

Read our guide explaining when drinking may become alcohol use disorder for information about the behavioral and health-related factors considered during professional assessment.

Can a Standard Drink Calculator Tell You If You Have Alcohol Use Disorder?

No. A standard drink calculator measures alcohol content and cannot diagnose alcohol use disorder.

Alcohol use disorder involves difficulties controlling alcohol use and other behavioral or health-related consequences. A professional assessment considers more than the amount of alcohol consumed.

Potential concerns may include difficulty limiting consumption, continued drinking despite negative consequences, withdrawal symptoms or interference with important responsibilities.

The National Institute on Alcohol Abuse and Alcoholism provides additional information about alcohol use disorder and available treatment approaches.

If you are concerned about your relationship with alcohol, consult a qualified healthcare professional rather than relying on a numerical calculator result.

Can Standard Drinks Predict Blood Alcohol Concentration?

The number of standard drinks consumed does not independently determine an individual's blood alcohol concentration or current level of impairment.

Alcohol absorption and metabolism can vary according to numerous factors, including the time over which alcohol was consumed, individual physiology and other circumstances.

Our calculator does not estimate blood alcohol concentration, calculate when someone will become sober or determine whether someone can legally or safely operate a vehicle.

Do not use standard drink calculations to decide whether it is safe to drive after drinking alcohol.

Common Mistakes When Calculating Alcohol Content

Accurate standard drink estimates depend on entering consistent measurement information. The following mistakes can lead to inaccurate results.

  • Counting containers instead of standard drinks: A large or strong beverage may contain multiple standard drink equivalents.
  • Confusing proof with ABV: An 80-proof spirit contains 40% alcohol by volume, not 80%.
  • Using an incorrect serving size: A wine glass, beer can or cocktail glass may hold different liquid volumes.
  • Assuming every beer has the same ABV: Alcohol concentration can vary considerably between beer products.
  • Counting the entire bottle instead of the consumed portion: Enter the amount you want to calculate.
  • Double-counting cocktail ingredients: Calculate the finished drink or its individual ingredients, not both.
  • Confusing US drinks with UK units: These measurement systems have different definitions.

Checking the actual product label and using a consistent volume measurement can improve the reliability of your estimate.

How Standard Drink Tracking Can Support Treatment Conversations

Individuals researching alcohol treatment may find it useful to describe their drinking patterns using standardized alcohol measurements rather than relying exclusively on the number of glasses or bottles consumed.

Providing accurate information about beverage type, volume, frequency and alcohol concentration can help healthcare professionals better understand recent consumption patterns.

However, this information should not be used to create an unsupervised withdrawal or alcohol reduction plan.

People who may be physically dependent on alcohol can experience dangerous withdrawal when consumption suddenly stops or decreases substantially.

Our guide to why alcohol withdrawal can require medical supervision explains why appropriate professional care may be important.

Seizures, severe confusion, hallucinations or other medical emergencies require immediate medical assistance. In the United States, call 911.

Standard Drink Calculator vs. Other Alcohol Calculators

Different calculators address different aspects of alcohol awareness and recovery planning.

Calculator Primary Purpose
Standard Drink Calculator Calculate pure alcohol content and standardized alcohol equivalents.
Alcohol Calorie Calculator Estimate total beverage calories and nutritional energy.
Alcohol Savings Calculator Calculate alcohol-related expenses and potential financial savings.
Sobriety Calculator Track elapsed recovery time and sobriety milestones.
Rehab Cost Calculator Explore addiction treatment expenses and potential insurance costs.

Each calculator provides a different type of educational information. None replaces an individualized healthcare assessment.

Explore all available tools through our free addiction and recovery calculators collection.

Limitations of Our Standard Drink Calculator

Our alcohol content calculator uses established measurement relationships, but its accuracy depends on the information entered by the visitor.

  • Beverage presets are representative examples rather than verified values for individual products.
  • Serving volumes may be estimated rather than measured precisely.
  • Alcohol concentrations may vary between products and mixed drink recipes.
  • The density of ethanol is treated as an approximate constant.
  • Displayed results are rounded to two decimal places.
  • Alcohol-only calories exclude carbohydrates and other ingredients.
  • The calculator does not estimate intoxication, alcohol tolerance or individual medical risk.

Standardized alcohol measurements are useful for educational comparisons, but they do not establish safe consumption levels or determine treatment needs.

Frequently Asked Questions About Standard Drinks

What is considered one standard drink in the United States?

One US standard drink contains approximately 14 grams of pure alcohol. This corresponds to about 12 fluid ounces of beer at 5% ABV, five fluid ounces of wine at 12% ABV or 1.5 fluid ounces of distilled spirits at 40% ABV.

How do I calculate the number of standard drinks?

Multiply the beverage volume in milliliters by the alcohol by volume percentage divided by 100, then multiply by 0.789 to estimate grams of pure alcohol. Divide the result by 14 to calculate US standard drinks.

How many standard drinks are in a 12-ounce beer?

A 12-fluid-ounce beer at 5% ABV contains approximately one US standard drink. A beer of the same size containing 9% ABV contains approximately 1.8 standard drinks. Actual alcohol content depends on the beverage's volume and strength.

How many standard drinks are in a 750 mL bottle of wine?

A 750-milliliter bottle of wine at 12% ABV contains approximately 5.07 US standard drinks. A bottle of the same size at 14% ABV contains approximately 5.92 standard drinks.

What is the difference between US standard drinks and UK alcohol units?

A US standard drink contains approximately 14 grams of pure alcohol, while a UK alcohol unit contains 10 milliliters of pure alcohol. Using the calculator's ethanol density, one US standard drink corresponds to approximately 1.77 UK alcohol units.

How do I convert alcohol proof to ABV?

Divide the US proof value by two to calculate alcohol by volume. For example, an 80-proof spirit contains 40% ABV, while a 100-proof spirit contains 50% ABV.

Can I calculate standard drinks in cocktails and mixed drinks?

Yes. Add each alcoholic ingredient separately using its actual volume and ABV or enter the finished beverage's known volume and final ABV. The calculator combines the alcohol content of up to 20 entries. Avoid counting both the finished drink and its ingredients.

Can a standard drink calculator tell me if I am safe to drive?

No. A standard drink calculator estimates the amount of pure alcohol in beverages. It cannot determine blood alcohol concentration, impairment, time to sobriety or whether someone is legally or medically safe to drive.

Find Alcohol Addiction Treatment and Recovery Support

Understanding how much alcohol a beverage contains may provide useful context for conversations about drinking habits, health concerns and recovery.

If you are experiencing difficulties controlling alcohol use or have concerns about withdrawal, professional assessment can help identify appropriate support.

RehabsNearMe.ai provides educational resources and information about addiction treatment services throughout the United States. You can also explore FindTreatment.gov to locate substance use and mental health treatment providers.

Medical Disclaimer: This standard drink calculator provides educational estimates of beverage alcohol content. It does not diagnose alcohol use disorder, predict blood alcohol concentration, establish individual drinking limits, recommend alcohol reduction schedules or determine whether driving is safe. Consult a qualified healthcare professional for individualized medical and treatment guidance.

Top